MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111 Issue 1
February 1998
Programming Procedures
Page4-65Lines and Trunks
4
● Single Line Procedure
Console Display/Instructions Additional Information PC
Specify entry mode.
Select .
Enter the line/trunk number for LS-ID Delay.
Assign or remove the LS-ID Delay.
Select or
.
You may continue to assign or remove the LS-ID
delay from additional lines/trunks by repeating
Steps 2 and 3.
Return to the System Programming menu.
Select twice.
◆ Block Procedure
Console/Display Instructions Additional Information PC
Specify the block of 20 lines associated with the 20 line button s
on the system programming console.
Select
Assign the LS-ID Delay to the appropriate lines/trunks.
Toggle the green LED on or off as required.
On = assign the LS-ID Delay
Off = remove the LS-ID Delay
Dial or type:
Trunk number [
nnn
]
Slot and port number *[
sspp
]
Logical ID number #[
nnn
]