MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111 Issue 1
February 1998
Programming Procedures
Page4-54Lines and Trunks
4
Console/Display Instructions Additional Information PC
Continue to assign a principal user to another line or trun k, or go to Step 9.
Select .
Return to Step 6. The next line/trunk
is displayed on Line 1.
Save your entry.
Select .
Return to the System Programming menu.
Select twice.
QCC Queue Priority Level 4
Use this procedure to assign QCC queue priority level values (1 to 7) t o each
loop-start, ground-start, and automatic-in tie trunk in your system. The value
assigned determines the order in which calls are sent to the QCC operator
positions. Call priority 1 is the highest priority, and 7 is the lowest priority.
NOTE:NOTE:NOTE:
This procedure applies to Hybrid/PBX mode only in a system that includes
QCC operator positions.
Summary: QCC Queue Priority Level 4
Programmable by System Manager
Mode Hybrid/PBX
Idle Condition Not required
Planning Form Form 2c, System Numbering: Line/Trunk Jacks
Factory Setting 4
Valid Entries 1 to 7
Inspect Yes
Copy Option No