MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111 Issue 1
February 1998
Programming Basics
Page1-72Product Enhancements
1
HotLine Feature 1
The Release 5.0 HotLine feature is designed for retail sales, catalogue sales, and
other types of businesses and organizations and is available in all three modes of
system operation. It allows a system manager to program a single-line telephone
extension connected to an 008 OPT, 012, or 016 module as a HotLine. When a
user lifts the handset at the HotLine extension, the telephone automatically dials
the inside extension or outside telephone number programmed as the first
Personal Speed Dial number (code #01) for the extension. The system does not
permit calls to be transferred, put on hold, or conferenced. (A user can press the
telephone’s Hold button, if it has one, to put a call on local hold, but the call
cannot be redirected in any way. Switchhook flashes are ignored.)
Personal Speed Dial codes can be programmed from the extension prior to
HotLine assignment (a system programming function). Alternatively, a Personal
Speed Dial code can be programmed from the single-line telephone after HotLine
operation is assigned. However, because of security considerations, this is a one-
time opportunity. Once the Personal Speed Dial number is programmed, any
changes to it or any other extension programming must be performed using
centralized telephone programming.
Any type of inside or outside line that is normally available to a single-line
telephone can be assigned to a HotLine extension. Generally, the HotLine
telephone does not receive calls, and its lines should be set to No Ring.
!SECURITY ALERT:

If a HotLine extension accesses a loop-start line, that line should provide

reliable disconnect and be programmed for reliable disconnect. Otherwise, a

user at the extension may be able to stay on the line after a call is completed

and then make a toll call.

Group Calling Enhancements 1
Release 5.0 and later systems include Group Calling feat ures that enhance group
calling operations.
Most Idle Hunt Type 1
In addition to the Circular (factory setting) and Linear hunt types supported in
earlier releases, a third hunt type distributes calling group calls in an order based
on which agent has waited the longest since transferring or hanging up on an
incoming calling group call. For some applications, this hunt type is more efficient
than the circular type because it takes into account the varying duration of calls.
The system distributes calls based on when an agent last completed a call, not on
when he or she last received one. This hunting method ignores non-calling grou p
calls. For example, if an agent transfers a call that arrived on a line not assigned
to the calling group, the calling group member’s most-idle status is unaffec ted.