MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111 Issue 1
February 1998
Common Administrative Procedures
Page3-69Extensions
3
Console Display/Instructions Additional Information PC
Specify the extension.
Save your entry.
Select .
If you get the Station Busy message, wait for an
idle condition or exit system programming and try
again later.
Assign the extension. ● ◆
Single Line/Trunk P rocedure
Specify entry mode.
Select .
Enter the line or trunk number.
If no DSS is attached:
SP: “Entering an Extension”
If DSS is attached:
Toggle the red LED on or
off as required. Go to Step 5.
On = extension is assigned to
trunk or pool.
Off = extension is not assigned
to trunk or pool.
xxxx
= extension number entered in Step 3
For a single line/trunk, go to
● Single Line/Trunk Procedure.
For a block of lines, go to
◆ Block Procedure.
xxxx
= extension number entered
in Step 3
Dial or type [
nnn
].