Lucent Technologies 6.0 Print Reports 4

MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111 Issue 1 February 1998
Common Administrative Procedures
Page4-427Print Reports
4
Print Reports 4
Use the procedures in this section to change the language for system reports and
to print the system reports.
Report Language 4
Use this procedure to change the language of the system reports. It applies to
Release 1.1 and higher. Unless you change the report language, reports are
printed in the language chosen as the system language.
Summary: Report Language 4
Programmable by System Manager
Mode All
Idle Condition Not required
Planning Form Form 1, System Planning
Factory Setting English
Valid Entries English, French, Spanish
Inspect No
Copy Option No
Console Procedure More→ → → or or
→ →
PC Procedure →→→ or or → →
Printing System Reports 4
The communications system can be used to print a variety of reports. You can
print individual reports or use the option to print the entire set of available
reports, including all report sections and options. See Appendix F for samples of
the print reports.
Use this procedure to print the reports listed below. With the exception of Trunk
Information, the dash lists under the bullets show the sections of e ach report that
automatically print when the report option is selected.
■All
— Each report
— All report options
■System Set Up