MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111 Issue 1
February 1998
Common Administrative Procedures
Page4-423Labeling
4
Labeling 4
This section contains summaries on adding or changing labels for the following:
■Extension Directory
■Lines or Trunks
■Posted Message
■Group Calling
■System Speed Dial Directory
For detailed information see Chapter 3, “Common Administrative Procedures.”

Extension Directory 4

Use this procedure to establish alphanumeric system labels for display telephone
users to identify the person calling or leavin g a message. This procedure is also
used to program the Extension Directory feature for MLX telephones.
NOTE:NOTE:NOTE:
In Release 6.0 and later systems (Hybrid/PBX mode only) where networked
systems are connected by PRI tandem trunks, programmed labels for
extensions on the remote system may be displayed at a ca ll rec ipient’ s MLX
or analog multiline display telephone on a local system. If other types of
trunks connect the networked systems, the call display is the same as for
an outside call. For additional information about controlling the display for
such incoming calls, see “Optional Extension Features” on page –277
A label can have a maximum of seven characters.

Summary: Extension Directory 4

Programmable by System Manager
Mode All
Idle Condition Not required
Planning Form Form 2a, System Numbering: Extension Jacks
Factory Setting Not applicable
Valid Entries Not applicable
Inspect No
Copy Option No