MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111 Issue 1
February 1998
Programming Procedures
Page4-2Basic System Operating Conditions
4
Basic System Operating Conditions 4
The procedures in this section are all related to the system rather than to the
operation of telephones, operator positions, lines, or trunks. These are operating
conditions that must be set only once, when the system is new, or when you reset
the system defaults.
NOTE:NOTE:NOTE:
You must reset the system time when Daylight Savings Time begins and
ends.
This section contains the following programming procedures:
■System Restart
■Board Renumbering
■Mode of Operation
■Automatic Maintenance Busy
Programming summaries are included for the following procedures:
■System Programming Position Assignment
■System Language
■System Date
■System Time
See Chapter 3, “Common Administrative Procedures,” for detailed programming
information.

System Restart 4

!CAUTION:
!CAUTION:

This procedure is to be performed by qualified support personnel only.

Use this procedure to perform a System Restart (cold start). All calls are dropped
when you perform this procedure. System programming is saved. Telephones
with the Extension Status feature may lose toll restrictions as a result of a System
Restart.