MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111 Issue 1
February 1998
Programming with SPM
Page2-51System Programming
2
When the restore completes, press to return to the SPM Main Menu.
System Programming 2
A primary function of SPM is to provide a method for program ming the
communications system. The Sys Program option gives you access to all of the
system programming features available from the system programming console.

Basic Programming Information 2

To begin programming, you must perform one of the following to display the
System Programming menu on the console or PC:
In most cases, you can press Exit or 5 to exit from a screen without making any
changes. Exceptions to this are noted as part of a procedure. When you complete
a procedure and press ( ), you usually move up one screen in the menu
hierarchy. Occasionally, when you press ( ), you return to the previous
screen.

In a few cases,

pressing

brings you back to the System
Programming menu where you can select another option to program or exit from
system programming.
To complete a procedure and save the information you have programmed, press
( ).
If you are programming a group of sequentially numbered extensions or trunks,
you may have the option of pressing ( ). This saves your entry and
automatically provides the number of the next extension or trunk in the sequence,
thus saving you a couple of steps. If displays on the screen, you can use it
with the current option.
xxxx
= number of blocks sent
On the console: Menu→ →
On the PC: Type → →
Press any key
→ →