MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111 Issue 1
February 1998
Common Administrative Procedures
Page4-329System Features
4
Inside Dial Tone 4
Use this procedure to set the inside (system) dial tone to be either different from,
or the same as, the outside line/trunk dial tone.
NOTE:NOTE:NOTE:
The inside dial tone must be the same as the outside dial tone when the
internal dial tone is not recognized by software applications or modems.
Summary: Inside Dial Tone 4
Programmable by System Manager
Mode All
Idle Condition Not required
Planning Form Form 8a, System Features
Factory Setting Inside dial tone is different from outside dial tone
Valid Entries Inside, Outside
Inspect No
Copy Option No
Console Procedure → → or → →
PC Procedure → → or → →