Lucent Technologies 6.0 Common Information 4, Set Up 4, Programmable Options 4

MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111 Issue 1 February 1998
Common Administrative Procedures
Page4-437Integrated Administration
4
Common Information 4
The switch and the applications share the following information:
■System numbering of extensions, trunks, and pools
■System labeling of the user (or other input name) associated with each
extension, trunk, and pool
■The coverage Group that sends its calls to the applications
■The calling group set up for each service of the applications
■The Reliable Disconnect setting for loop-start trunk
■The Delay Ring and Coverage Delay Interval settings
■The Transfer Return Time and VMS Transfer Return Interval settings
Set Up 4
You cannot program the common information until you have completed basic
setup programming for the communications system. Use SPM or the system
programming console to program the following:
■Mode of operation
■System numbering
■System operator positions
■Phantom extensions
■Lines/Trunks to pools assignment
NOTE:NOTE:NOTE:
If you do not want all lines to have the same application services, you must
assign lines with the same services to the same pools.
Programmable Options 4
When you complete the system setup, you can use the information in Table 4–6 to
program through Integrated Administration.