MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111 Issue 1
February 1998
Common Administrative Procedures
Page3-188Optional Group Calling Features
3
Console/Display Instructions Additional Information PC
Specify the type of login for the group that occurs after a power failure.
Save your entry.
Select or
.
Use to program the next calling group.
Return to Step 8.
Return to the System Programming menu.
Select three times.
Queue Control 3
In Release 6.0 and later systems, the system manager can control the maximum
number of calls allowed in the primary calling group queue for calls that arrive on
the following types of facilities:
■DID (Direct Inward Dialing) and dial-in TIE
■PRI facilities programmed for dial- pl an routing
■All calls transferred from a VMI (voice messaging interface) port
■Internal calls to the DGC group
■Internal calls to the calling group through the QCC Position-Busy backup
(PBB)
■Intrasystem calls to the DGC group
■All private network dialed calls, including remote DID
When the number of the calls in queue reaches the program med maximum,
subsequent callers receive a busy signal.
NOTE:NOTE:NOTE:
Dial-in tie trunks, including private tandem tie trunks (Release 6.0 and later
systems, Hybrid/PBX only) cannot be assigned directly to calling groups.
xxxx
= number entered in Step 6
Press the button or function key next to
your selection.