Lucent Technologies 6.0 - page 576

MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111 Issue 1 February 1998
Programming Procedures
Page4-106DS1 Facilities
4
Switched 56 Dial Plan Routing 4
Dial plan routing provides a way to route incoming calls received on a Switched 56
Network line. An incoming call is routed by matching the incoming number and
then optionally deleting and/or adding digits to direct the call to a specific
endpoint. The expected digits are the number of incoming digits outpulsed from
the central office.
Summary: Switched 56 Dial Plan Routing 4
Programmable by System Manager
Mode Hybrid/PBX
Idle Condition 100D module idle
Planning Form Form 3b, Incoming Trunks: DS1 Connectivity (100D module)
Factory Setting D4 compatible
Valid Entries D4, ESF
Inspect No
Copy Option No
Console Procedure To specify Expected Digits:
→More→ →
→ →Drop→Dial expected
digits→ → → →
To specify Delete Digits:
→More→ →
→ →Drop→Dial delete digits→
→ → →
To specify Add Digits:
→More→ →
→ →Drop→Dial add digits→
→ → →
PC Procedure To specify Expected Digits:
→ →→→→ + →Type expected
digits→→→→
To specify Delete Digits:
→ →→→→ + →Type delete
digits→→→→
To specify Add Digits:
→ →→→→ + →Type add
digits→→→→