Lucent Technologies 6.0 Transfer Return Time 4, Summary: Transfer Return Time 4, One-Touch Transfer/One-Touch Hold 4

MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111 Issue 1 February 1998
Common Administrative Procedures
Page4-318System Features
4
Transfer Return Time 4
Use this procedure to specify the number of times the telephone rings before a
call transferred to another inside telephone is returned to the originator. A setting
of 0 means that transferred calls are never returned to the originator.
NOTE:NOTE:NOTE:
The transfer return time should not be set to 0 in a system with single-line
telephones.
The transfer return time should not be set to 0 in a system with single-line
telephones.
Summary: Transfer Return Time 4
Programmable by System Manager
Mode All
Idle Condition Not required
Planning Form Form 8a, System Features
Factory Setting 4 rings (Integrated Administration: 6 rings)
Valid Entries 0 to 9 rings
Inspect No
Copy Option No
Console Procedure → → →Drop→
Dial no. of rings→ → →
PC Procedure → → → + →Type no. of rings→
→ →
One-Touch Transfer/One-Touch Hold 4
Use this procedure to assign either the One-Touch Transfer or One-Touch Hold
feature.
One-Touch Transfer allows users to initiate transfers to another extension by
pressing an Auto Dial or DSS button for that extension. If the One-Touch Transfer
feature is assigned, you must also specify whether the transfer comple tion is
manual (the user has to press another button to complete the transfer) or
automatic (the transfer is completed automatically).
The One-Touch Transfer feature is not available on single-line telephones.