MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111 Issue 1
February 1998
Programming Procedures
Page4-62Lines and Trunks
4
Console/Display Instructions Additional Information PC
Return to the System Programming menu.
Select twice.
◆ Block Procedure
Console/Display Instructions Additional Information PC
Specify the block of 20 lines associated with the 20 line button s
on the system programming console.
Select
Assign or remove the lines for the specified QCC operator.
Toggle the green LED on or off as required.
On = operator receiving calls
Off = operator not receiving calls
Return to the System Programming menu.
Select twice.
Loop-Start Identification Delay 4
Use this procedure to delay the alerting (ringing) of calls arriving on loop-start
lines/trunks connected to an 800 GS/LS-ID module at all ex tensions until
approximately six seconds have elapsed since the port module informed the
system software that the line was ringing, or the system software has been
informed that Caller ID information is available, whichever comes first.
This option can be programmed on a per-trunk basis. It gives t he appearance to
the users that the Caller-ID information is available the moment the call arrives at
the extension, and prevents applications or adjuncts from answering the call too
soon.
The LS-ID Delay setting appears on the Ground-Start/Loop-Start Trunk
Information report.