MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111 Issue 1
February 1998
Programming Procedures
Page4-67Lines and Trunks
4
Summary: Clock Synchronization 4
Programmable by System Manager
Mode All
Idle Condition Not required
Planning Form Form 3b, Incoming Trunks: DS1 Connectivity 100D module
Form 3i, Incoming Trunks: BRI Options
Factory Setting Primary clock: the first 100D module in the control unit
carrier;
Valid Entries Primary, Secondary, Tertiary, Loop/Local
Inspect No
Copy Option No
Console Procedure →More→ → →Dial slot
no.→ →Dial port no. OR Select source of
synchronization→ → →Dial slot no.→
→Dial port no. OR Select source of synchronization→
→ →Dial slot no.→ →Dial port no. OR
Select source of synchronization→ → →
PC Procedure → → → →Type slot no.→ →Type port no.
OR Select source of synchronization→→→Type slot
no.→ →Type port no. OR Select source of
synchronization→→→Type slot no.→ →Type
port no. OR Select source of synchronization→
→ →
Procedure: Clock Synchronization 4
Console Display/Instructions Additional Information PC
Select the Lines and Trunks menu.