MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111 Issue 1
February 1998
Programming with SPM
Page2-74Upgrading the System
2
Table 2–14. Programming Needed after Upgrade to Release 5.0
Table 2–13. Continued
Feature Sequence
PRI Call-by-Call
Services Table To select MCI Toll Call-by-Call Service s for a
DMS-250 or DEX600E switch type:
→ → → →
→ → →List
no.→→ → or
→
To specify local exchange carrier Dial Plan Routing
services for a DMS-100 switch type:
→ → → →
→ → →List
no.→ → → or
or →
Feature Sequence
CTI Link This is a Maintenance step. Start the procedure from
the main menu, not the System Programming screen.
Busy out the board first:
Menu→ → →Dial slot no.→
→ →
Program the CTI L ink ( t he s w it ch mu s t be i n
Hybrid/PBX mode):
→ →Dial extension no.→→
→
This is a Maintenance step. Start the procedure from
the main menu, not the System Programming screen.
Restore the slot:
Menu→ → →Dial slot no.→ →
→.
NOTE:NOTE:NOTE:
If the MLX module containing the CTI Link is the first module,
use the SPM program to busy-out the slot.
Continued on next page