MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111 Issue 1
February 1998
Programming Procedures
Page4-63Lines and Trunks
4
Any extension or adjunct that answers an incoming CO line on the first ring
causes the Caller ID information associated with the call to be lost. The adjunct
must be programmed to either answer the call on the second (or later) ring, or
delay the call. The call can be delayed either by setting t he ring option on the
buttons associated with the adjunct or by using the LS-ID Delay option.
NOTE:NOTE:NOTE:
Caller-ID information is not available on ground-start lines/trunks.
Summary: Loop-Start Identif ication Delay 4
Programmable by System Manager
Mode All
Idle Condition Not required
Planning Form Form 2c, System Numbering: Line/Trunk Jacks
Factory Setting No delay
Valid Entries Loop-start line/trunk numbers
Inspect Yes
Copy Option Yes, but only to the same trunk type
Console Procedure To program a single line/trunk:
→More→ →Select entry mode→
Dial no. of the line/trunk→ → →
To program a block of lines/trunks:
→More→ →Select block of lines/
trunks→Toggle LED On/Off→ → →
PC Procedure To program a single line/trunk:
→ → → →Type no. of the line/trunk→
→ →
To program a block of lines/trunks:
→ → →Select block of lines/trunks→
Toggleletter On/Off→→→