MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111 Issue 1
February 1998
Common Administrative Procedures
Page4-387Automatic Route Selection
4
Other Digits 4
Use this procedure to specify other (extra) digits that must be added by the
system to the beginning of the number dialed by the caller, when calls are placed
on an identified route.
NOTES:
1. Pool routes must be programmed before you assign other digits.
2. In Release 6.0 and later systems where ARS calls will be made from
lines/trunks connected to a remote networked system, the local ARS
feature adds (prepends) the ARS access code of the remote system.
A maximum of 20 digits can be added, in any combination of the digits 0
through 9.
Special characters such as switchhook flash, Stop, and # cannot be included as
extra digits. Pause is allowed in every position but the first.
Other digits are assigned to Tables 1 through 18.
Summary: Other Digits 4
Programmable by System Manager
Mode Hybrid/PBX
Idle Condition Not required
Planning Form Form 3f, Automatic Route Selection Tables
Factory Setting 0
Valid Entries Up to 20 digits (any combination of 0 to 9)
Inspect No
Copy Option No
Console Procedure → → or More and → Dial
table no. and pool route no.→ →Drop→Dial digits to
be added→ → →
PC Procedure → → or and →Type table no. and pool
route no.→ → + →Type digits to be added→→
→