Lucent Technologies 6.0 Type ext. no. for MWI receiver

MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111 Issue 1 February 1998
Common Administrative Procedures
Page4-312Optional Group Calling Features
4
Summary: Group Calling Message-Waiting
Indicator 4
Programmable by System Manager
Mode All
Idle Condition Not required
Planning Form Form 7d, Group Calling
Factory Setting No message-waiting receiver assigned
Valid Entries Extension number
Inspect No
Copy Option No
Console Procedure →More→ → →
Dial calling group ext. no.→ →Dial ext. no. for MWI
receiver→ → →
PC Procedure → → → →Type calling group ext. no.→
→Type ext. no. for MWI receiver→ → →
Group Calling Calls-In-Queue Alarm Thresholds 4
Use this procedure to specify the number of unanswered calls that w ait in the
calling group queue before group members are notified with either an external
alert (an external alert is turned on when the third threshold is met) or a light on
the telephone. Group members are notified when the number of calls waiting in
the queue is equal to or greater than the programmed thresholds as follows:
■First Threshold, flashing light
■Second Threshold, winking light
■Third Threshold, solid light
NOTE:NOTE:NOTE:
To configure only one threshold, set
all thresholds to the same number. To
configure only two thresholds, set two of the thresholds to be the same
number.