MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111 Issue 1
February 1998
Programming Basics

Page1-24Programming Procedures

1
System Programming Hierarchy 1

The following table shows all of the options that are available under each of the

System Programming main menu options displayed on the system programming

console. Following the option name is a brief description of the option and the

page number where detailed instructions can be found.

Main menu options are shown in a separate box. First-level options are bold,

second-level options are preceded by an asterisk (*). The remaining levels are

shown with increasing degrees of indentation.

Description Page
System
Restart Restart the system (cold start) 4–2
SProg Port Extension used for system programming 3–3
Mode Sets the system mode. See

Equipment

4–8
* Key

and

Operations Reference

* Hybrid/PBX
* BehindSwitch
Board Renum Renumber boards that have already been installed 4–6
MaintenBusy Enable Automatic Maintenance Busy 4–10
* Enable
- Auto Busy
Tie Trunks
- Enable
- Disable
* Disable Disable Automatic Maintenance Busy
Date System date 3–7
Time System time 3–9
Back/Restore
* Backup Back up system programming to a memory card 3–279
* Restore Restore system programming from a memory card 4-377
* Auto Backup Automatic backup 3–286
- Off Turn off automatic backups
- Daily Daily backups of system programming
- Weekly Weekly backups of system programmi n g
SysRenumber
Default Numbering Default extension numbering plans 4–14
* 2-Digit
* 3-Digit
* SetUp Space