MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111 Issue 1
February 1998
Common Administrative Procedures
Page4-307Optional Group Calling Features
4

Summary: Hunt Type 4

Programmable by System Manager
Mode All
Idle Condition Not required
Planning Form Form 7d, Group Calling
Factory Setting Circular hunting pattern
Valid Entries Circular, Linear
Inspect No
Copy Option No
Console Procedure →More→ → →
Dial calling group ext. no.→ → , , or
→ → → →
PC Procedure → → → →Type calling group ext. no.→
→ or or →→→→

Group Calling Delay Annou ncements 4

Use this procedure to designate the announcement devices used to play
messages to callers while they are waiting in the queue.
Two announcement devices can be designated for each calling group; however,
more than one calling group can use the same announc ement device. The
extensions to which the delay announcement devices are connected should not
be programmed as a calling group member.
If the extension jack or MFM was previously programmed as a regular extension,
you must remove all line/trunk button assignments before you designate the
extension jack as a delay announcement device.
NOTE:NOTE:NOTE:
In Release 6.0 and later systems (Hybrid/PBX mode only), a delay
announcement device must be in the local system, not in a remote
networked system.