Lucent Technologies 6.0 Enter , or Type ext. no. of announcement device

MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111 Issue 1 February 1998
Common Administrative Procedures
Page3-159Optional Group Calling Features
3
Group Calling Delay Annou ncements 3
Use this procedure to designate the announcement devices used to play
messages to callers while they are waiting in the queue.
As of Release 5.0, 10 primary and one secondary announcement de vices can be
designated for each calling group; however, more than one calling group can use
the same announcement device. The extensions to which the delay
announcement devices are connected should not be programmed as calling
group members.
If the extension jack or MFM was previously programmed as a regular extension,
you must remove all line/trunk button assignments before you designate the
extension jack as a delay announcement device.
NOTE:NOTE:NOTE:
In Release 6.0 and later systems (Hybrid/PBX mode only), a delay
announcement device must be in the local system, not in a remote
networked system.
Summary: Group Calling Delay Announcements 3
Programmable by System Manager
Mode All
Idle Condition Not required
Planning Form Form 7d, Group Calling
Factory Setting No delay announcement devices are assigned
Valid Entries Primary Announcements, Secondary Announcement
Inspect Yes (for primary announcements)
Copy Option No
Console Procedure →More→ → →Dial
calling group ext. no.→ → or
→Enter Extension number of
Announcement device→ → → →
PC Procedure → → → →Type calling group ext. no.→
→or →Type ext. no. of announcement device→
→ →