MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111 Issue 1
February 1998
Programming Procedures
Page4-246BRI Facilities
4
Console Display/Instructions Additional Information PC
Erase the current DN.
Enter the new DN.
Dial or type [

xxxxxxxxxx

].
Save your entry.
Select .
Return to the System Programming menu.
Select three times.
Timers 4
Use this procedure to set timer thresholds.
!CAUTION:
!CAUTION:

The factory settings for these thresholds are standard and rarely need to be

changed. If you are not sure of the correct timer and threshold settings for

your BRI lines and trunks, check with your Lucent Technologies

representative before you make a change. Incorrect settings can cause

your BRI lines and trunks to malfunction.

If the network does not respond before the programmed time, the system takes
the appropriate corrective action.
The timers are listed below.
■T200 Timer. Minimum time that the link layer waits for an acknowledgment
of a message sent from the communications system to the network.
■T203 Timer. Maximum time that the link layer can remain inactive.
xxx
= line number selected in Step x.
Press Drop. +