Lucent Technologies 6.0 Telephone and Operator Features 4

MERLIN LEGEND Communications System Release 6.0
System Programming
555-660-111 Issue 1 February 1998
General Feature Use and Telephone Programming
PageD-3Telephone and Operator Features
D
Feature Codes 4
Feature codes are 1-, 2-, and 3-digit codes that activate features. A feature code
is used by first pressing the dedicated Feature button on MLX telephones,
pressing a programmed Feature button on analog multiline telephones, or dialing
on single-line telephones. Each of these methods sends a signal to the system
that a feature code is about to be dialed. When the code is dialed, the feature is
activated.
NOTE:NOTE:NOTE:
Queued Call Console (QCC) system operators cannot use feature cod es.
The following features can be used only by dialing feature codes:
■Pickup
■ Forward/Follow Me—Cancel One
■ Forward/Follow Me—Cancel All
■Message Cancel
■Personal Speed Dial
■System Speed Dial
NOTE:NOTE:NOTE:
Pressing the Conf, Transfer , Speaker , or Feature button while activating a
feature cancels the process. Pressing any other button, such as th e Mute,
HFAI, Message Status, DSS Page, More, Message, Clock, analog
multiline display keys, or analog multiline disconnect button does not cancel
the feature activating process.
Telephone and Operator Features 4
Table D–1 lists the telephone and operator features that can be assigned to
telephones or consoles either through centralized telephone programming or by
users from their telephones.