SATO 10e service manual Retighten set screw 6 while holding ribbon guide in place

Section 8: Adjustment Procedures

9 Manipulate adjustment collar (7) and ribbon guide while observing the ribbon results.

NOTE: Facing the collar is a scale to assist in incremental adjustment.

10 Retighten set screw (6) while holding ribbon guide in place.

NOTE: The ribbon guide has an orifice just below the set screw to assist in holding it in place while the set screw is tightened. It is recommended that an allen wrench be inserted for this activity.

11 Install tear-off plate (2) as applicable and front housing cover (1).

6

7

5

2

1

4 3

Figure 8-3, Ribbon Wrinkle Adjustments

SATO M10e Service Manual PN: 9001113A Page 8-4