SATO 10e service manual Lcd Display, Definition

Section 5: Printer Configuration

LCD DISPLAY					DEFINITION
CARD COPY/FORMAT			5. If an error is encountered in the copy process, one of the following
XXXXXXX ERROR				messages will be displayed on the second line:
				R/W Error	Indicates a Read/Write error occured
				No Card Error	Indicates no card was recognized
				Mem Full Error	Indicates that there is insufficient memory available.
CARD->MEMORYCOPY			This selection allows SATO fonts to be copied from the PCMCIA Memory card
SATOFONT		Y/N	installed in the Memory Card slot.
			1.	Use the CURSOR keys to step the cursor to desired option. If Yes is
				selected, the printer will enter the Card Copy mode. If No is selected, the
				display will advance to the Card to Memory Copy All mode.
COPY START			2.	Confirm the selection by stepping the cursor to the Yes option. If No is
YES		NO		selected, the display will return to the previous selection.
SATO FONT COPY			3.	Press the ENTER key to select the option. If Yes was selected the copy
COPYING				process will begin.
SATO FONT COPY			4.	Press the ENTER key to advance to next display.
COMPLETED
CARD COPY/FORMAT			5. If an error is encountered in the copy process, one of the following
XXXXXXX ERROR				messages will be displayed on the second line:
				R/W Error	Indicates a Read/Write error occured
				No Card Error	Indicates no card was recognized
				Mem Full Error	Indicates that there is insufficient memory available.
MEMORY->CARDCOPY			This selection allows the entire contents from the optional Expanded Memory
ALL	<0MB> Y/N		to be copied to the PCMCIA Memory card installed in the Memory Card slot.
			1.	Use the CURSOR keys to step the cursor to desired option. If Yes is
				selected, the printer will enter the Card Copy mode. If No is selected, the
				display will advance to the Card to Memory Copy All mode.
COPY START			2.	Confirm by stepping the cursor to the Yes option. If No is selected, the
YES		NO		display will return to the previous selection.
CARD->MEMORY			3.	Press the ENTER key to select the option. If Yes was selected the copy
COPY COPYING				process will start.
CARD->MEMORYCOPY			4. Press the ENTER key to advance to the next display.
COMPLETED
CARD COPY/FORMAT			5. If an error is encountered in the copy process, one of the following
XXXXXXX ERROR				messages will be displayed on the second line:
				R/W Error	Indicates a Read/Write error occured
				No Card Error	Indicates no card was recognized
				Mem Full Error	Indicates that there is insufficient memory available.
MEMORY->CARDCOPY			This selection allows the entire contents of the optional Expanded Memory to
ALL	<0MB>	Y/N	be copied to the PCMCIA Memory card instaled in the Memory Card slot.
			1. Use the CURSOR keys to step the cursor to desired option. If Yes is
				selected, the printer will enter the Card Copy mode. If No is selected, the
				display will advance to the Card to Memory Copy All mode display.
COPY START			2. Confirm the selection by stepping the cursor to the Yes selection. If No is
YES		NO		selected, the display will return to the previous selection.

SATO M10e Service Manual PN: 9001113A Page 5-14