Section 5: Printer Configuration
LCD DISPLAY |
|
| DEFINITION | |
|
|
| ||
| 3. | Press the ENTER key to select the option. If Yes was selected the copy | ||
COPYING |
|
| process will begin. | |
4. Once the copy process is complete, press the ENTER key to step the | ||||
COMPLETED |
|
| display. |
|
|
| |||
CARD COPY/FORMAT | 5. If an error is encountered in the copy process, one of the following | |||
XXXXXXX ERROR |
| messages will be displayed on the second line: | ||
|
|
| R/W Error | Indicates a Read/Write error occured |
|
|
| No Card Error | Indicates no card was recognized |
|
|
| Mem Full Error | Indicates that there is insufficient memory available. |
|
| |||
| This selection allows the printer firmware to be copied from the PCMCIA | |||
PROGRAM | Y/N | Memory Card to the printer. | ||
|
| 1. | Use the CURSOR keys to step the cursor to desired option. If Yes is | |
|
|
| selected, the printer will enter the Card Copy mode. If No is selected, the | |
|
|
| display will advance to the mode display. | |
|
|
|
| |
COPY START |
| 2. | Confirm the selection by stepping the cursor to the Yes option. If No is | |
YES | NO |
| selected, the display will return to the previous selection. | |
| 3. | Press the ENTER key to select the option. If Yes was selected the copy | ||
COPY COPYING |
| process will begin. | ||
4. Press the ENTER key to advance to the next display when the copy | ||||
COMPLETED |
|
| process is complete. | |
|
| |||
CARD COPY/FORMAT | 5. If an error is encountered in the copy process, one of the following | |||
XXXXXXX ERROR |
| messages will be displayed on the second line: | ||
|
|
| R/W Error | Indicates a Read/Write error occured |
|
|
| No Card Error | Indicates no card was recognized |
|
|
| Mem Full Error | Indicates that there is insufficient memory available. |
|
| |||
This selection allows the current firmware installed in the printer to be copied | ||||
PROGRAM | Y/N | to a PCMCIA Memory Card. | ||
|
| 1. Use the CURSOR keys to step the cursor to desired option. If Yes is | ||
|
|
| selected, the printer will enter the Card Copy mode. If No is selected, the | |
|
|
| display will advance to the mode display. | |
|
|
| ||
COPY START |
| 2. Press the ENTER key to select the option. If Yes is selected the copy | ||
YES | NO |
| process will begin. If No is selected, the display will return to the previous | |
|
|
| selection. |
|
3. Press the ENTER key to advance to the next display when the copy | ||||
COMPLETED |
|
| process is complete. | |
|
| |||
CARD COPY/FORMAT | 4. If an error is encountered in the copy process, one of the following | |||
XXXXXXX ERROR |
| messages will be displayed on the second line: | ||
|
|
| R/W Error | Indicates a Read/Write error occured |
|
|
| No Card Error | Indicates no card was recognized |
|
|
| Mem Full Error | Indicates that there is insufficient memory available. |
|
|
|
|
|
SATO M10e Service Manual | PN 9001113A | Page |