SATO 10e service manual Character Font Capabilities

Section 2: Technical Data

MEDIA

Maximum Caliper	.008 Inches (0.21 mm)
Maximum Roll Diameter	7.8 Inches (200 mm), Wound face inward
Minimum Core Diameter	3 Inches (76.2 mm)

RIBBON

Maximum Width	10.7 Inches (273 mm)
Length	984 Feet (300 m)
Thickness	4.5 Microns, Wound face inward

SENSING

See-Through	Fixed, 0.9 Inches (22.5 mm) left of center
Reflective Eye-Mark	Fixed, 0.2 Inches (5 mm) from left label edge.
Continuous Form	Sensor not used.

INTERFACE MODULES

Parallel Port	IEEE 1284 Standard
Serial Port	RS232C (9600 to 57,6000 dps) Standard
	RS422/485 (9600 to 57600 bps) Optional
	Ready/Busy or X-On/X-Off Flow Control
	Bi-Directional Status
Universal Serial Bus	USB Version 1.1 Standard
Ethernet	10/100 Base T

PROCESSING

CPU	32 Bit RISC
FLash ROM	4 Mega-Bytes
SDRAM	16 Mega-Bytes
Receive Buffer	2.95 Mega-Bytes
Memory Expansion	See Options and Accessories

CHARACTER FONT CAPABILITIES

MATRIX FONTS

U Font	5 dots W x 9 dots H
S Font	8 dots W x 15 dots H
M Font	13 dots W x 20 dots H
XU Font	5 dots W x 9 dots H (Helvetica)
XS Font	17 dots W x 17 dots H (Univers Condensed Bold)

SATO M10e Service Manual PN: 9001113A Page 2-2