![](/images/new-backgrounds/1185794/185794235x1.webp)
Section 9: Factory Resets
11 Press the ENTER key to test print. Press the ENTER key again to stop printing.
WARNING: THIS TEST ACTIVATES ALL THE HEATING ELEMENTS ON
THE PRINT HEAD AND THEREFORE SHOULD BE USED FOR TESTING
PURPOSES ONLY. FULL WIDTH LABELS MUST BE USED TO PREVENT
PRINT HEAD DAMAGE.
12Verify that the counters on the test print have reset to 0.0 km.
13Power Off the printer and confirm that all switches are in the Off or down position.
CLEAR EEPROM
CAUTION: RESETTING THE PRINTER WILL CLEAR ALL REGISTERS.
1Record all dip switch positions.
2Place all dip switches in the OFF position.
3Place the
4Press and hold the LINE and FEED keys while turning on the power switch.
5Release the LINE and FEED keys when the printer beeps.
|
|
|
|
| LCD DISPLAY: | MAINTENANCE MODE |
|
|
|
| |
|
|
|
|
6 Place the
|
|
|
|
| LCD DISPLAY: | FACTORY MODE |
|
|
|
|
|
7 Use the CURSOR keys to advance to the next display.
|
|
|
|
| LCD DISPLAY: | ALL CLEAR MODE |
|
|
|
|
|
8 Press the ENTER key to select the All Clear Mode option and advance to the next display.
|
|
|
|
| LCD DISPLAY: | ALL CLEAR COUNTER |
|
|
| EEPROM |
|
|
|
|
|
9 Press the ENTER key to select the Clear Counter option and advance to the next display.
|
|
|
|
|
| LCD DISPLAY: | COUNTER ALL CLEAR |
| |
|
| YES | NO |
|
|
|
|
|
|
10Use the CURSOR keys to step the cursor to the YES option.
11Press the ENTER key to select and clear the EEPROM.
SATO M10e Service Manual | PN: 9001113A | Page |