SATO 10e service manual Configuration Modes, Normal Mode

Section 5: Printer Configuration

CONFIGURATION MODES

MODE	KEY SEQUENCE	INITIAL DISPLAY
Normal	POWER	ONLINE QTY:000000
Advanced	LINE + POWER	ADVANCED MODE
Card
Service
Counters
Test Print	FEED + POWER	TEST PRINT MODE
Default Setting	LINE + FEED + POWER	DEFAULT SETTING YES NO
Maintenance-Factory	LINE + FEED + POWER	FACTORY MODE
All Clear
Clear Non-Standard Protocol	DSW2-7 ON + LINE + FEED + POWER	ALT. PROTOCOL
Protocol Code Download	DSW2-7 ON + POWER + LINE	USER DOWNLOAD
Hex Dump	DSW2-4 ON + POWER	ONLINE QTY: 000000

NORMAL MODE

The printer initially powers on in the ONLINE mode. The user can access the User Settings using the following procedures.

	LCD DISPLAY						DEFINITION
V 05.00.03.00						Displays the firmware during the initialization.
INITIALIZING
ONLINE						The operational status is displayed on the top line and the label quantity on the
	QTY:000000					bottom. The print quantity descends as labels are printed. Press the LINE key
						to change the status.
OFFLINE						Press the LINE key once. When the display changes to OFFLINE, press the
		000000				FEED and LINE keys simultaneously for more than one second and release.
PRINT DARKNESS						The LCD now displays the five Print Darkness options. The lowest setting
1	2	3	4		5	represents the lightest print and the highest setting the darkest print.
						1.	Use the Cursor keys to step the cursor to the desired option.
						2.	Press the ENTER key to select the option and advance to the next display
PRINT SPEED						The current setting is indicated by the cursor.
2	4	6	8	10		1.	Use the Cursor keys to step the cursor to the desired option.
						2.	Press the ENTER key to select the option and advance to the next display.

SATO M10e Service Manual PN: 9001113A Page 5-10