![](/images/new-backgrounds/1185794/185794147x1.webp)
Section 7: Replacement Procedures
NOTE: Figure
FEED ROLLER REPLACEMENT
The feed roller is considered to be a high wear component due to its treading against the print media. This treading will eventually wear grooves into the rubber material and negatively effect print output.
1Switch off the printer and disconnect the power supply cord.
2Remove the top, front, and left housing covers.
NOTE: Figures
3 Remove media stock to provide free access to feed roller (1, Figure
4, 5 | 4 |
|
6
2
| 5 |
1 | 3 |
|
Figure 7-5, Feed Roller Replacement
SATO M10e Service Manual | PN: 9001113A | Page |