Section 4: Accessories Installation

4 Insert clock chip (3) into the vacant IC Socket (4).

NOTE: A properly applied chip will be oriented so that its notched end is aligned with that of the IC socket.

2

4

1, 3

Figure 4-2, EEPROM Installation

5Connect the power supply cord.

6Factory Reset as directed in the Factory Reset section of this manual.

7Press and hold the LINE key while simultaneously switching on the power.

 

 

 

 

 

LCD DISPLAY:

INITIALIZING

 

 

 

ROM V00.00.00.00

 

 

 

 

 

8 When the printer emits an audible beep, release the LINE key.

 

 

 

 

 

LCD DISPLAY:

ADVANCED MODE

 

 

 

 

 

9 Press the ENTER key repeatedly until the calender option appears on the LCD.

 

 

 

 

 

 

LCD DISPLAY:

SET CALENDAR

 

 

 

YES

NO

 

 

 

 

 

 

10Use the CURSOR key to advance the cursor to the YES option.

11 Press the ENTER key to select the option.

SATO M10e Service Manual

PN: 9001113A

Page 4-4

Page 28
Image 28
SATO 10e service manual Insert clock chip 3 into the vacant IC Socket