- 103 -
User Exec
Display Message
When the optional arguments <slot/port> or <vlanid> are not used, the command displays the
following information.
Admin Mode: Indicates whether or not MLD Snooping is active on the switch.
Interfaces Enabled for MLD Snooping: Interfa ces on which MLD Snooping is enabled.
Multicast Control Frame Count: Displ ays the number of MLD Control frames t hat are processed by
the CPU.
VLANs Enabled for MLD Snooping: VLANs on which MLD Snooping is en abled.
When you specify the <slot/port> value s , the following information displays.
MLD Snooping Admin Mode: Indicates whether MLD Snooping is active on the interface.
Fast Leave Mode: Indicates wh ether MLD Snooping Fast Leave is active on th e interface.
Group Membership Interval: Shows the amount of time in seconds that a switch will wait for a report
from a particular group on a particul ar interface, which is participating on the interface, befo re deleting
the interface from the entry. This value may be configure d.
Max Response Time: Interface on which MLD Snooping is enabled.
Multicast Router Present Expiration Time: Di splays the amount of time to wait b efore removing an
interface that is participating on the i nterface from the list of interfaces with multicast routers attached.
The interface is removed if a query is not received. This value may be configured.
When you specify a value for <vlanid>, the following information appears.
VLAN ID: VLAN Id.
MLD Snooping Admin Mode: Indicates whether MLD Snooping is active on the VLAN.
Fast Leave Mode: Indicates whether MLD Snooping Fast Leave is active on the VLAN.
Group Membership Interval: Shows the amount of time in seconds that a switch will wait for a report
from a particular group on a particular interface, which is participating in the VLAN, before deleting the
interface from the entry. This value may be configured.
Max Response Time: VLANs on which MLD Snooping is enable d.
Multicast Router Present Expiration Time: Di splays the amount of time to wait b efore removing an
interface that is participating in the VLAN from the list of interfaces with multicast routers attached.
The interface is removed if a query is not received. This value may be configured.
7.2.8.2 show ipv6 mld snooping mrouter interface
The user can go to the CLI Privilege Exec to display information about statically configured multicast
router-attached interfaces, use the sho w ipv6 mld snooping mrouter interface Privilege command.
Syntax