- 935 -
Selection Criteria
Slot/Port - Select the interface for which data is to be displayed. You must configure at least one
router interface before you can display data for a DVMRP interface. Otherwise you will see a
message telling you that no router interfaces are av ailable, and the configuration summary screen will
not be displayed.
Non-Configurable Da ta
Interface Mode - The adm inistrative mode of the sele cted DVMRP routing i nterface, either enable or
disable.
Protocol State - The operational state of the DVMRP protocol on the sele cted interface, either
operational or non-operational.
Local Address - The IP address used as a source address in packets sent fro m the selected
interface.
Interface Metric - The metric used to calculate distance vectors for the selected interface.
Generation ID - The DVM RP generation ID used by the router for the selected in terface. This value is
reset every time an interface is (re)started and is placed in prune messages. A change in ge neratio n
ID informs the neighbor routers that any previous information about this router sh ould be discarded.
Received Bad Packets - The number of invalid packets received on the selected interface.
Received Bad Routes - The numb er of invalid routes received on the selected interface.
Sent Routes - The number of routes sent on the selected interface.
Neighbor IP - The IP address of the neighbor wh ose information is displayed.
State - The state of the specified neighbor router on the selected interface, either active or down.
Neighbor Uptime - The DVMRP uptime for the sp ecified neighbor on the selected interface. This is
the time since the neighbor entry was learned.
Neighbor Expiry Time - The DVMRP expiry time for t he specified neighbor on the selected interface.
This is the time left before this neighbor entry will age out, and is not applicable if the neighbor router's
state is down.
Generation ID - The DVMRP generation ID for the specified neighbor on the selected interface.
Major Version - The DVMRP Major Version for the specifie d neighbor on the selected interface.
Minor Version - The DVMRP Minor Version for the specified neighbor on the selected interface.
Capabilities - The DVMRP capabilities of the specifi ed neighbor on the selected interface.
Received Routes - The number of route s re ceived for the specified neighbor on the selected
interface.
Received Bad Packets - The number of invalid packets received for the specified neighbor on the
selected interface.
Received Bad Routes - The numb er of invalid routes received for the specified neighbor on the
selected interface.
Command Buttons
Refresh - Refresh the screen with the new data.