- 63 -
Display Message
VLAN ID: There is a VLAN Identifier (VID) asso ciated with each VLAN. The range of the VLAN ID is 1
to 3965.
VLAN Name: A string associated with this VLAN a s a conve nience. It can be up to 16 alphanumeric
characters, including blanks. The defa ult is blank. VLAN ID 1 is always named `Default`. This field is
optional.
VLAN Type: Type of VLAN, which can be Default, (VLAN ID = 1), can be static (one that is configured
and permanently defined), or Dynamic (one that is created by GVRP registration).
Interface: Indicates by slot id and port number which port is controlled by the fields on this line.
It is possible to set the parameters for all ports by using the selectors on the top line.
Current: Determines the degree of participatio n of this port in this VLAN. The permissible values are:
Include: This port is always a member of this VLAN. This is equival ent to registration fixed in the
IEEE 802.1Q standard.
Exclude: This port is never a member of this VLAN. This is equivalent to registration forbidden in
the IEEE 802.1Q standard.
Autodetect: Specifies to allow the po rt to be dynamica lly registered in this VLAN via GVRP. The
port will not participate in this VLAN unless a join request is received on this port. This is
equivalent to registration normal in the IEEE 802.1Q standard.
Configured: Determines the configured degree of participation of this port in this VLAN. The
permissible values are:
Include: This port is always a member of this VLAN. This is equival ent to registration fixed in the
IEEE 802.1Q standard.
Exclude: This port is never a member of this VLAN. This is equivalent to registration forbidden in
the IEEE 802.1Q standard.
Autodetect: Specifies to allow the po rt to be dynamica lly registered in this VLAN via GVRP. The
port will not participate in this VLAN unless a join request is received on this port. This is
equivalent to registration normal in the IEEE 802.1Q standard.
Tagging: Select the tagging behavior for this port in this VLAN.
Tagged: Specifies to transmit traffic for this VLAN as tagged frames.
Untagged: Specifies to transmit traffic for this VLAN as untagged frames.
7.2.3.3 show vlan association mac
This command displays the VLAN associated with a specific configured MAC address. If no MAC address
is specified, the VLAN associations of all the configured MAC addresses are displayed.
Syntax
show vlan association mac [<macaddr>]
<macaddr> - enter a MAC Address to display the table entry for the requested MAC address.
Default Setting
None
Command Mode