- 191 -
Default Setting
None
Command Mode
Global Config
7.3.11.3 serviceport protocol
This command specifies the oob configuration protoco l to be used. If you modify this value, the change is
effective immediately.
Syntax
serviceport protocol {bootp | dhcp | dhcp6 | none [dhcp6]}
<bootp> - Obtains IP address from BOOTP.
<dhcp> - Obtains IP address from DHCP.
<dhcp6> - Obtains IPv6 address from DHCPv6.
<none> - Obtains IP address by setting configuration.
<none dhcp6> - Obtains IPv6 addre s s by setting configuration.
Default Setting
None
Command Mode
Global Config
7.3.11.4 serviceport protocol dhcp6 restart
This command is used to initiate a DHCPv6 client request by oob interface.
Syntax
serviceport protocol dhcp6 restart
Default Setting
None
Command Mode
Global Config