- 260 -
7.8.4.3 radius server attribute 4
This command to set the NAS-IP address for the radius server.
Syntax
radius-server attribute 4 [ipaddr]
no radius-server attribute 4
no – use this command to reset the NAS-IP addres s for the radius server.
Default Setting
None
Command Mode
Global Config
7.8.4.4 radius-server dead-time
This command cnfiguresradius server dead time.
Syntax
radius-server dead-time <value>
no radius-server dead-time
Value - Set radius server dead time (sec). Range 1 – 255.
no - This command is used to set dead time to the default value.
Default Setting
255
Command Mode
Global Config
7.8.4.5 radius-server host
This command is used to configure the RADIUS authenticatio n and accounting server.
If the 'auth' token is used, the comman d config ures the IP address to use to connect to a RADIUS
authentication server. Up to 3 server s can be configured per RADIUS client. If the maximum number of
configured servers is reach ed, the command will fail until one of the servers is removed by executin g the
no form of the command. If the optional <port> parameter is used, the command will configure the UDP
port number to use to connect to the con f igured RADIUS server. In order to configure the UDP port