- 365 -
Restrictions The class types of both <classname> and <refclassname> must be identical (that is, any
vs. any, or all vs. all). A class type of acl is not supported by this command.
Cannot specify <refclassname> the same as <classname> (that is, self-referen cing of class name not
allowed). At most one other class may be referenced by a class. Any attempt to delete the
<refclassname> class while still referenced by any <classname> shall fail.
The combined match crite ria of <classname> and <refclassname> must be an allowed combination
based on the class type. Any subseque nt changes to the <refclassname> class match criteria must
maintain this validity, or the change attempt shall fail. The total number of class rules formed by the
complete reference class chain (includes both predecessor and successor cla sses) must not exceed a
platform-specific maximum. In some cases, each removal of a refclass rule reduces the maximum
number of available rules in the class definition by one.
7.21.2.6 no match class-map
This command removes fro m the specified class definition the set of match conditions defined f or another
class.
Syntax
no match class-map <refclassname>
<refclassname> is the na me of an existing DiffServ class whose match conditions
are being referenced by the specified class definition.
i
There is no [not] option for this match command.
Default Setting
None
Command Mode
Class-Map Config / Ipv6-Class-Map Config
7.21.2.7 match cos
This command add s to the specified class definition a match conditi on for the Cla ss of Service value (th e
only tag in a single tagged packet or the first or oute r 802.1Q tag of a double VLAN tagged packet). The
value may be from 0 to 7.
i
This command is not available on the Broad com 5630x platform.