- 479 -
Command Mode
Interface Config

8.5.2.12 ip rip receive version

This command configure s the interfa ce to allow RIP control packets of the specified version(s) to be
received.
The value for <mode> is on e of: rip1 to receive only RIP version 1 formatted packets, rip2 for RIP v ersion
2, both to receive packets f rom either format, or none to not allow any RIP co ntrol packets to be received
Syntax
ip rip receive version {rip1 | rip2 | both | none}
no ip rip receive version
no - This command configure s the inte rface to allow RIP control packets of the default version(s) to
be received.
Default Setting
Both
Command Mode
Interface Config

8.5.2.13 ip rip send version

This command configure s the interfa ce to allow RIP control packets of the specified version to be sent.
The value for <mode> is one of: rip1 to broadcast RIP version 1 formatted packets, rip1c (RIP v ersion 1
compatibility mode) which sends RIP version 2 formatted packets via broadcast, rip2 for sending RIP
version 2 using multicast, or none to not allow any RIP control packets to be sent.
Syntax
ip rip send version {rip1 | rip1c | rip2 | none}
no ip rip send version
no - This command configure s the inte rface to allow RIP control packets of the default version to be
sent.
Default Setting