Fortinet 548B 11.3.4 Managing Filters 11.3.4.1 Configuring MAC filter Configuration Page

- 706 -
Command Buttons
Refresh - Refresh the data on the screen with the present state of the data in the switch.
11.3.4 Managing Filters
11.3.4.1 Configuring MAC filter Configuration Page
Selection Criteria
MAC Filter - This is the li st of MAC address and VLAN ID pairi ngs for all configured filters. To cha nge
the port mask(s) for an existing filter, select the entry you want to change. To add a new filter, select
"Create Filter" from the top of the list.
VLAN ID - The VLAN ID used with the MAC address to fully identify packets you want filtered. You
can only change this field when you ha ve selected the "Create Filt er" option.
Configurable Data
MAC Address - The MAC address of the filter in the format 00:01:1A :B2:53:4D. You can only change
this field when you have selected the "Create Filter" option.
You cannot define filters for these MA C addresses:
• 00:00:00:00:00:00
• 01:80:C2:00:00:00 to 01:80:C2:00:00:0F
• 01:80:C2:00:00:20 to 01:80:C2:00:00:21
• FF:FF:FF:FF:FF:FF
Source Port Members - List the ports you want included in the inbound filter. If a packet with the
MAC address and VLAN ID you selected is received on a port that is not in the list, it will be dropped.
Command Buttons
Submit - Update the switch with the values on the screen. If you want the swit ch to retain the new
values across a power cycle you must perform a save .
Delete - Remove the currently selected filter.
Delete All - Remove all configured filters.