- 606 -
Interface: Valid unit, slot, and port nu mber separated by forward sl ashes.
Interface Mode: Indicates whether PIM-SM is enabled or disabled on the interface.
Operational State: The current state of the PIM-SM protocol on the interface. Po ssible values
are Operational or Non- Op erational.
10.7.1.2 show ipv6 pimsm bsr
This command displays the bootstrap router (BSR) information. The output includes elected BSR
information and information about the lo cally configured candidate rendezvous point (RP) advertisement.
Syntax
show ipv6 pimsm bsr
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Message
BSR Address: IP address of the BSR.
Uptime: Length of time that this router has been up (in hours, min utes, and seconds).
BSR Priority: Priority as configured in the ip pimsm bsr-candidate command.
Hash Mask Length: Length of a mask (maximum 32 bits) that is to be ANDed with the group a ddress
before the hash function is called. This value is configured in the ip pimsm bsr-candidate command.
Next Bootstrap Mess age In: Time (in hours, minutes, and second s) in which the next bootstrap
message is due from this BSR.
Next Candidate RP advertisement in: Time (in hours, minutes, and se conds) in which the next
candidate RP advertisement will be sent.
10.7.1.3 show ipv6 pimsm interface
This command displays interface configuration parameters for PIM-SM on the specified interface. If no
interface is specified,all interfaces are displayed.
Syntax
show ipv6 pimsm interface [<unit/slot/port>]
Default Setting