- 72 -
<vlan-list> - VLAN ID (Range: 1 –3965) – separate non-consecutive IDs with ',' and no spaces and
no zeros in between the range; Use '-' for range.
add - The interface is always a membe r of this VLAN. This is equiva lent to registration fixed.
tagged - All frames transmitted for this VLAN will be tagged.
untagged - All frames transmitted for this VLAN will be untagged.
remove - The interface is removed from the member of this VLAN. This is equivalent to registration
forbidden.
Default Setting
None
Command Mode
Interface Config
This command config ures t he degre e of partici pation f or all inte rfaces in a VLA N. The ID is a valid VLAN
identification number.
Syntax
switchport allowe d vlan {add {tagged | untagged} | remove} all <vlanid >
<vlanid> - VLAN ID (Range: 1 –3965).
all - All interfaces.
add - The interface is always a membe r of this VLAN. This is equiva lent to registration fixed.
tagged - all frames transmitted for this VLAN will be tagged.
untagged - all frames transmitted for this VLAN will be untagged.
remove - The interface is removed from the member of this VLAN. This is equivalent to registration
forbidden.
Default Setting
None
Command Mode
Global Config

7.2.3.18 switchport tagging

This command configure s the taggin g behavior for a specific interface in a VLAN to enable. If tagging is
enabled, traffic is transmitted as tagged frames. If tagging is disabled, traffic is transmitted as untagged
frames. The ID is a valid VLAN identification number.