- 624 -
Command Buttons
Refresh - Refresh the data on the screen with the present state of the data in the router.
11.2.3.6 HTTP Configuration
Configurable Data
HTTP Session Soft Timeout - This field is used to set the inactivity timeout for HTTP session s. The
value must be in the range of (0 to 60 ) minutes. A value of zero corresponds to an infinite time out. The
default value is 5 minutes. The currently configured value is shown when the web page is displayed.
HTTP Session Hard Timeout - This field is used to set the hard timeout for HTTP sessions. This
timeout is unaffected by the activity level of the sessio n. The valu e must b e in th e range of (0 to 168)
hours. A value of zero correspond s to an infinite timeout. The defa ult value is 24 hours. The currently
configured value is shown when the web page is displayed.
Maximum Number of HTTP Sessions - This field is used to set the maximum allowable number of
HTTP sessions. The value must be in the range of (0 to 16). The default value is 16. The cu rrently
configured value is shown when the web page is displayed.
Command Buttons
Submit - Send the updated screen to the switch. Chan ges take effect on the switch but these
changes will not be retained across a power cycle unless a save i s performed.