- 874 -
• Stale - More than ReachableTime millise con ds have elapsed since the last positive
confirmation was received that the forward path was functioning properly. While in STALE
state, the device takes no action until a packet is sent.
• Delay - More than ReachableTime milliseconds have elapsed since the last positive
confirmation was received that the forward path was functioning pr operly. A packet was sent
within the last DELAY_FIRST_PROBE_TIME seconds. If no reachability confirmation is
received within DELAY_FIRST_PROBE_TIME se con ds of entering the DELAY state, send a
neighbor solicitation message and change the state to PROBE.
• Probe - A reachability confirmation is actively sought by resending neighbor solicitation
messages every RetransTimer milliseconds until a reachability confirmation is received.
Last Updated - Time since the address was confirm ed to be reachable.
Command Buttons
Refresh - Refreshes the screen with most recent data.
Clear IPv6 Neighbors - Clear IPv6 neighbors on selected interface or all interfaces.
11.6.6 Viewing IPv6 Static Neighbor Table Information Page
Configurable Data
IPv6 Address - Specifies the IPv6 address of neighbor.
MAC Address - Specifies the IPv6 address of neighbor.
Non-Configurable Da ta
IPv6 Address - Display the IPv6 address of current IPv6 neighbor table.
MAC Address - Display the MAC address of current IPv6 neighbor table.
Command Buttons
Add - Add the IPv6 neighbor.
Delete - Delete the IPv6 neighbor.
Refresh - Refreshes the screen with most recent data.