- 751 -
Refresh - Refresh the data on the screen with the present state of the data in the switch.
11.3.19 Managing Spanning Tree
11.3.19.1 Configuring Switch Spanning Tree Configuration Page
Selection Criteria
Spanning Tree Mode - Specifies wheth er spanning tree operation i s enabled on the switch. V alue is
enabled or disabled
Spanning Tree Forward BPDU - Spec ifies whether spanning tree for BPDU is enabled on the
switch. Value is enabled or disabled.
Force Protocol Version - Specifies the Force Protocol Version parameter for the switch. The options
are IEEE 802.1d, IEEE 802.1w, and IEEE 802.1s The default value is IEEE 802.1w.
Configurable Data
Configuration Name- Identifier used to identify the configuration currently being used. It may be up
to 32 alphanumeric ch aracters
Configuration Revision Level - Identifier used to identify the configuration currently being used. The
values allowed are betwee n 0 and 65535. The default value is 0.
Non-Configurable Da ta
Configuration digest key - Identifier used to identify the config uration currently being used.
MST Table - Table consisting of the MS T instances (inclu ding the CST) and the corresponding VLA N
IDs associated with each of them.
VID Table - Table consisting of the VLAN IDs and the corresponding FID associated with each of
them.
FID Table - Table consisting of the FIDs and the corre spo nding VLAN IDs associated with each of
them.