- 263 -
Command Mode
Global Config
7.8.4.9 radius-server msgauth
This command enables the message authenticator attribute for a specified server.
Syntax
radius-server msgauth <ip addr|hostname >
<ipaddr|hostname > - is a IP address or hostname.
Default Setting
None
Command Mode
Global Config
7.8.4.10 radius-server primary
This command is used to configure the primary RADIUS authentication server for this RADIUS client. The
primary server is the one that is used by default for handling RADIUS requests. The rem aining configured
servers are only used if the primary server cannot be reached. A maximum of three servers can be
configured on each client. Only one of these serve rs can be configured as the primary. If a primary server
is already configured prior to this command being executed, the server specified by the IP address
specified used in this com mand will become the new primary server. The IP address mu st match that of a
previously configured RADIUS authentication server.
Syntax
radius-server primary <ipaddr|hostname>
<ipaddr|hostname > - is a IP address or a hostname.
Default Setting
None
Command Mode
Global Config