- 864 -
Delete - Used to delete the corresponding certificate, if it is present.
11.5.6 Defining Secure Shell Configuration
11.5.6.1 Configuring Secure Shell Configuration Page
Selection Criteria
Admin Mode - This select field is used to Enable or Disable the administrative mode of SSH. The
currently configured value is sh own when the web page is displayed. The default value is Disable.
SSH Version 1 - This select field is used to Enable or Disable Protocol Level 1 for SSH. The cu rrently
configured value is shown whe n the web page is displayed. The default value is Enable.
SSH Version 2 - This select field is used to Enable or Disable Protocol Level 2 for SSH. The cu rrently
configured value is shown whe n the web page is displayed. The default value is Enable.
Maximum Number of SSH Sessions Allowed - This select field is used to configure the ma ximum
number of inbound SSH sessions allowed on the switch. The cu rrently configured value is shown
when the web page is displayed. The range of acceptable value s for this field is (0-5).
Configurable Data
SSH Session Timeout (Minutes) - This text field is used to configure the ina ctivity timeout value for
incoming SSH sessions to the switch. The acceptable range for this value is (1-160) minutes.
Non-Configurable Da ta
SSH Connections in Use - Displays the numbe r of SSH co nnectio ns currently in use in the system.
Keys Present - Displays which keys, RSA, DSA or both, are present (if any).
Key Generation Status - Displays which keys, RSA or DSA, are being generate d.
Command Buttons
Submit - Send the updated screen to the switch. Chan ges take effect on the switch but these
changes will not be retained across a power cycle unless a save is performed.
Download Host Keys - Link to the File Transfer page for the Host Key download. Note that to
download SSH key files SSH must be a dministratively disabled and there can be no active SSH
sessions.