- 69 -
frames received on this int erface are accepted and assigned the value of the interface VLAN ID for this
port. With either option, VLAN tagged frames are forwarded in accordance with the IEEE 802.1Q VLAN
Specification.
Syntax
switchport acceptable-f rame-type {tagged | all}
no switchport acceptable-frame-type {ta gged | all}
tagged - VLAN only mode.
all - Admit all mode.
no - This command set s the frame acceptance mo de per i nterface to Admi t All. For Admit All mode,
untagged frames or prio rity frames received on thi s interface are accepte d and a ssigne d the value of
the interface VLAN ID for this port. With either option, VLAN tagged frames are forwarded in
accordance with the IEEE 802.1Q VLAN Specification.
Default Setting
Admit all
Command Mode
Interface Config
This command sets the frame accepta nce mode for all interfaces. For VLAN Only mode, untagged
frames or priority frames received on this interface are discarded. For Admit All mode, untagged frames
or priority frames received on this interface a re accepted and assigned the value of the interface VLAN ID
for this port. With either option, VLAN tagged frames are forwarded in accordance with the IEEE 802.1Q
VLAN Specification.
Syntax
switchport acceptable-f rame-type all {tagged | all}
no switchport acceptable-frame-type all { t agged | all}
tagged - VLAN only mode.
all – One is for Admit all mode. The other one is for all interfaces.
no - This command sets the frame acceptance mode for all interfaces to Admit All. For Admit All
mode, untagged frames or priority frames received on this interface are accepted and assigned the
value of the interface VLAN ID for this port. With either option, VLAN tagge d frames are fo rwarded in
accordance with the IEEE 802.1Q VLAN Specification.
Default Setting
Admit all
Command Mode
Global Config