- 861 -
Selection Criteria
TACACS+ Server Selects the TACACS+ server for which dat a is to be displayed or configured. If the
add item is selected, a new TACACS server can be configured.
Configurable Data
IP Address - Specifies the TACACS+ Server IP address.
You cannot define these IP addresses:
0.0.0.0
255.255.255.255
224.xxx.xxx.xxx
127.0.0.1
Host name - The host name of the serve r being added.
Priority - Specifies the order in which the TACACS+ servers are used. It should be within the range
0-65535.
Port - Specifies the authentication port. It should be within the range 0-65535.
Key String - Specifie s the authentication and encryption key for TACACS+ communications between
the device and the TACACS+ server. The valid range is 0-128 characters. The key must match the
encryption used on the TACACS + server.
Connection Timeout - The amount of time that passes before the connection between the device
and the TACACS+ server time out. The range is between 1-30.
Encrypted - When the secret strin g is encrypted, this box need to be checked. This field is only
displayed if the user has READWRITE access.
Command Buttons
Submit - Send the updated screen to the switch and cause the changes to take effect on the switch
but these changes will not be retained across a power cycle unless a save is performed.
Remove - Remove the sel ected server from the configuration.
11.5.4 Defining IP Filter Configuration
11.5.4.1 IP Filter Configuration Page
Management IP filter designates station s that are allowed to make configuration changes to the Switch.
Select up to five management stations used to manage the Switch. If you choose to define one or more