- 613 -
Interface Config
10.7.2.10 ipv6 pimsm join-prune-interval
This command is used to configure the interface join/prune interval for the PIM-SM router. The join/prune
interval is specified in seconds. This parameter can be configured to a value fro m 0 to 18000.
Syntax
ipv6 pimsm join-prune-interval <10-3600>
no ipv6 pimsm join-prune-interval
no - Use this command to set the join/prune interval t o the default value.
Default Setting
60
Command Mode
Interface Config
10.7.2.11 ipv6 pimsm hello-interval
This command is used to configure the P IM-SM hello interval for the specified interface. The hello interval
range is 0-18000 is specified in seconds.
Syntax
ipv6 pimsm hello-interval <0-18000>
no ipv6 pimsm hello-interval
no - This command is used to set the hello interval to the default value.
Default Setting
30
Command Mode
Interface Config